Difference between revisions of "OpenFlexure Scope"

From Hackuarium
Jump to navigation Jump to search
Line 6: Line 6:
 
[http://rwb27.github.io/openflexure_microscope/docs/1_actuator_assembly.html Actuator Assembly]
 
[http://rwb27.github.io/openflexure_microscope/docs/1_actuator_assembly.html Actuator Assembly]
 
Used WD40 to oil the screws before twisting down.<br>
 
Used WD40 to oil the screws before twisting down.<br>
 +
Used Blue LED below, with 150ohm resister to start (maybe not best?) <br>
 
Used longer screws (15mm) to attach the motors. <br>
 
Used longer screws (15mm) to attach the motors. <br>
 +
Still need to figure out exactly how to wire things up, so can do bright field or epifluor, but the program openflexure ev is put into the fedora system of the 'inner sanctum' space.
 +
login with pi@openflexture.local  (and pass from our dear old mascot! )<br>

Revision as of 11:20, 3 June 2019

Our first real build of an OpenFlexure Scope is about to happen (23may19)!

more to come!
Following instructions from GitHub
Actuator Assembly Used WD40 to oil the screws before twisting down.
Used Blue LED below, with 150ohm resister to start (maybe not best?)
Used longer screws (15mm) to attach the motors.
Still need to figure out exactly how to wire things up, so can do bright field or epifluor, but the program openflexure ev is put into the fedora system of the 'inner sanctum' space. login with pi@openflexture.local (and pass from our dear old mascot! )