Difference between revisions of "Grow&Mix Bioink"

From Hackuarium
Jump to navigation Jump to search
Line 54: Line 54:
 
------------------------------------
 
------------------------------------
 
Learn with Gavrilo Bozovic the use of the UV and make tests with different exposure times 10' 30' 45' 60'
 
Learn with Gavrilo Bozovic the use of the UV and make tests with different exposure times 10' 30' 45' 60'
 
 
19/11/2014
 
--------------------------------------
 
Buy CANON Pixma ip2850 (bubble Ink) http://www.pctop.ch/pInfos.aspx?CODE=F27A01&PRINT=TRUE
 
Found that not refillable cartridges are available but "refilable ink kit".
 
Info and instructions for how to inject ink directly in the originals of CANON Pixma ip2850 and others http://www.uni-kit.com/pdf/inkjetrefillinstructions.pdf
 
  
 
Check the results of the use of the UV in different petri dishes for different exposure times: not working properly, will use the autoclave when repaired.
 
Check the results of the use of the UV in different petri dishes for different exposure times: not working properly, will use the autoclave when repaired.
  
 
(foto from Hackuarium)
 
  
 
26/11/2014
 
26/11/2014
 
----------------------------------------
 
----------------------------------------
Select with Yann Pierson a bacteria which is actuallly producing Yellow color. And preparing together with Sachiko the LB medium and learn how to sterealize it in the heat"pressure cooker".
+
Select with Yann Pierson a bacteria which is actuallly producing Yellow color. And preparing together with Sachiko the LB medium and learn how to sterealize it in the"pressure cooker".
  
 
27/11/2014
 
27/11/2014
Line 94: Line 85:
 
Both produce Violacein. Do mind that C. violaceum is a level 2 organism, opportunistic pathogen. So. I guess the best option is the Janthinobacterium lividum.
 
Both produce Violacein. Do mind that C. violaceum is a level 2 organism, opportunistic pathogen. So. I guess the best option is the Janthinobacterium lividum.
  
Searching for a way to extract the pigment from the plates and for a growing method in liquid nutrition.
+
Final strains, biosafety level 1:
 +
J. Lividum
 +
M. Luteus
 +
M. Roseus
 +
M. Aurantica
  
 
03/12/2014
 
03/12/2014
Line 106: Line 101:
 
05/12/2014
 
05/12/2014
 
--------------------------------------
 
--------------------------------------
Yellow chromobacteria: Micrococcus luteus (ML DSMZ) from DSMZ color: yellow, is now safe at home ;) thanks to Clément Drévo
+
LB medium (liquid, no agar)
 
+
See LB protocol
(foto from: http://microbio146.blogspot.ch/2011_08_01_archive.html)
 
 
 
--------------------------------------
 
07/12/2014
 
 
 
Ideal goal: bio ink printer, product design of a new ecological printer based on Continuous Ink Systems. Trying to get an unexpensive one (Epson R200, Epsonr340)
 
 
 
DIY proyects 2D printer with Arduino:
 
http://www.instructables.com/id/Homemade-arduino-printer/?ALLSTEPS
 
print characters at an XY position on LCD
 
http://playground.arduino.cc/Code/PCD8544
 
to draw and print you own glyph:
 
http://www.carlos-rodrigues.com/projects/pcd8544/
 
print controller:
 
http://www.instructables.com/files/orig/F2A/4VX1/GJQEKZ1T/F2A4VX1GJQEKZ1T.tmp
 
 
 
08/12/2014
 
-------------------------------
 
Ordered Janthinobacterium Lividum. Collaboration with Prof. Xavier Perret at UNIGE.
 
 
 
10/12/2014
 
--------------------------------
 
We have started to grow our little Yellow Babies, M. Luteus Thanks for the support Clement.
 
 
 
 
 
 
 
 
 
 
 
 
 
11/12/2014
 
-------------------------
 
Babies are not growing in Lb medium with 80 rpm and 22°C --> BUT GROWING at 37°C (Mayybe this is not well calibrated and actually is 30°C, try out both in case it doesn't work) 200rmp
 
 
 
 
 
15/12/2014
 
------------------------------
 
Yellow babies are growing but not in the way I want: its all the same soup of Lb medium and dizzy diving bacteria and "foam".
 
 
 
Have to think about a better way of making them grow: shaking speed, more food, less T°, add more density to the liquid medium?
 
 
 
 
 
16/12/2014
 
-----------------------------------------
 
M.Luteus (yellow babies) extractions started.
 
'''I used this protocol http://europepmc.org/backend/ptpmcrender.fcgi?accid=PMC212584&blobtype=pdf
 
''' Thanks Luc
 
 
 
PLAN to start new colonies in LB medium (liquid, no agar). --> I prepare for autoclave LB medium in 5 erlenmeyer bottles (250ml):
 
1 normal, 1 normal + 2g.Yest and 2g.tryptone, 3 normal + 4g.Yest + 4g.tryptone.
 
  
 
'''Autoclave instructions:  
 
'''Autoclave instructions:  
Line 181: Line 127:
  
 
Then we continue the process with this tools:
 
Then we continue the process with this tools:
 
  
 
1.- Pipette, always use the plastic cone(aeroject) on them: We extract some an put them in tubes (then close them).
 
1.- Pipette, always use the plastic cone(aeroject) on them: We extract some an put them in tubes (then close them).
Line 187: Line 132:
 
2.- Then we shake the tubes in the automatic vortex at 10 x 1000 and 10 minutes
 
2.- Then we shake the tubes in the automatic vortex at 10 x 1000 and 10 minutes
  
3.- Empty the lb medium that should remain on the top, we mix the rest (the pigment), with alcohol, we put the tubes in the machine of ultrasounds, in order to break the molecules to free the pigment. (ultra strong detergent would be helpful) the tube content should seem like this
+
3.- Empty the lb medium that should remain on the top, we mix the rest (the pigment), with alcohol, we put the tubes in the machine of ultrasounds, in order to break the molecules to free the pigment. (ultra strong detergent would be helpful) the tube content should seem creamy and colorful.
  
 
4.- and then we put them again into the vortex in order to compact the pigment and keep it as a first sample to work with, THE FIRST YELLOW INK!!!
 
4.- and then we put them again into the vortex in order to compact the pigment and keep it as a first sample to work with, THE FIRST YELLOW INK!!!
Line 195: Line 140:
  
  
For "mass" production ---> Bioreactor (2016)
+
For "mass" production ---> Bioreactor (2016)?
 
 
 
 
05/01/2015
 
-------------------------------
 
 
CHANGE OF PLANS --> form 2D to 3D, justement parce que c'est plus facile de injecter l'encre avec le "extruder"
 
 
 
On attendre le "PLA pellets" transparent pour voir l'effet de coleur dans le fil de plastic qui sont chauffés a 200°C.
 
 
 
Confirmé pour le 3d! je attendre mes petites mini machines ;)
 
 
 
 
 
17/11/2015
 
-----------------------------------
 
 
 
I want to get rid of the "non-ink" liquid and get a pigment pouder so I gonna put it to "dry" one nigth.
 
I expect to have something like this:
 
 
 
 
 
18/01/2015
 
--------------------------------------------
 
Mega fail!!!
 
35ml of ink wasted, dried, merged with the petri dish and impossible to use. (Acetone "eats" plastic).
 
 
 
 
 
Gladly this remains:
 
So, new batch comming....
 
 
 
 
 
Next week, starting with Lividum Janthinobacterium, also called apperntly Chromobacterium Violaceum founded on soil and in some animals like on Red Backed Salamander's (Plethodon Cinereus) back.
 
 
 
(original photo http://calphotos.berkeley.edu/cgi/img_query?enlarge=0000+0000+1104+0005)
 
 
 
Also gonna test some cutlefish ink for black.
 
 
 
 
 
22.01.2015
 
--------------------------------------------------------------
 
 
 
Building the prototipe
 
 
 
 
 
 
 
23.01.2015
 
----------------------------------------------------------------------
 
Showing the prototipe, all this material will be back on the lab soon ;)
 
 
 
 
 
  
 
------------------
 
------------------
Line 249: Line 146:
 
-----------------
 
-----------------
 
X.Perret, Senior Lecturer Microbiology Unit Laboratory of Microbial Genetics Sciences III – University of Geneva has accepted to collaborate in the project. We are working in the lab at UM under his supervision and the assistance of his students and Phd students.  
 
X.Perret, Senior Lecturer Microbiology Unit Laboratory of Microbial Genetics Sciences III – University of Geneva has accepted to collaborate in the project. We are working in the lab at UM under his supervision and the assistance of his students and Phd students.  
 
  
  
Line 257: Line 153:
  
 
As in TY is growing fast enough and very nicely, we decided to continue the liquid medium with this configuration.  
 
As in TY is growing fast enough and very nicely, we decided to continue the liquid medium with this configuration.  
 
  
 
We put them 24h. on the shaker at 170rpm and 27°C.  
 
We put them 24h. on the shaker at 170rpm and 27°C.  
 
 
  
  
Line 317: Line 210:
  
 
Note: We made the culture on TY and TY + Glycerol
 
Note: We made the culture on TY and TY + Glycerol
 
 
06/02/15
 
------------------------------------------------------
 
Red Hunting: We saw something interesting (nice reddish color) on the source's petri from  CLÉMENT DRÉVO , we isolated and grow it with the assistance of Yann Pierson. Tried to grow it in LB and MSA.
 
But.... didn't worked so far ;) Next time
 
 
  
  
Line 330: Line 216:
 
MSA, TY not working for M.luteus (Yellow)
 
MSA, TY not working for M.luteus (Yellow)
 
LB + 4gr. plus of "food" (yeast and peptone) neither. MLuteus grow better on LB agar and liquid medium at 37°C (maybe not well calibrated machine...)
 
LB + 4gr. plus of "food" (yeast and peptone) neither. MLuteus grow better on LB agar and liquid medium at 37°C (maybe not well calibrated machine...)
 
09/02/15
 
---------------------------------------------------------
 
Time to go hunting!
 
Today we had an interesting visit to the Lab, I found 3 nice Senior women close to my desk, they suggested me to try cochenille for the red pigment et.... voilà! It's used for Red Lipsticks and so easy to find it in our daily live, garden and supermarket!
 
 
http://www.sciencepresse.qc.ca/sites/www.sciencepresse.qc.ca/files/image/2011/09/image_17.png
 
 
  
 
10/02/15
 
10/02/15
Line 346: Line 224:
 
12/02/15
 
12/02/15
 
------------------------------------------------------
 
------------------------------------------------------
First attempts with Filabot extruder! I've put the natural white pellets on the machine and verted the bio+ink.
+
First attempts with Filabot extruder! ----> I've put the natural white pellets on the machine and verted the bio+ink.
 
I have some problems with the porosity of the plastics, gonna try mabe ask an expert to know how to solve this.  
 
I have some problems with the porosity of the plastics, gonna try mabe ask an expert to know how to solve this.  
  
 
+
The problem seems to be solved almost, if the pigments are added BEFORE putting them into the extruder let them dry (because of the extraction they already have alcohol so they dry fast) for a around 30min at room T°.
The problem seems to be solved almost, if the pigments are added BEFORE putting them into the extruder nad let them dry for a around 30min at room T°.
 
 
 
 
 
Niiiiice tryouts.
 
  
 
The result:
 
The result:
  
 
We could start printing with our Pr(ink)t as soon as I get to assembly and connect it!
 
We could start printing with our Pr(ink)t as soon as I get to assembly and connect it!
 
I will try also injecting the living bacteria directly on the plastic and see what happens.
 
 
 
 
17/02/15
 
----------------------------------------------------
 
New extraction of violacein is completed in UNIGE. I brougth bacl home 6 ml of beatiful purple ink ;) Gonna set up everything for the plastice coloration and extrution.So, as I experienced before, to much liquid (ethanol, buthanol...) is forming bubles in the extruder when evaporated, trapped in the noozle and released within the warm plastic wire. So, I will try to evaporate it in a petri before extruding it, leaving it open few hours till the buthanol is almost gone.
 
Starting to build the 3D printer for the final step and see what the result looks like after printing and to check if  the ink lasts 2 melting proceses.
 
 
 
31/03/2015
 
----------------------------------------------------
 
Starting engines for the exhibition:
 
 
 
22.04.15
 
-------------------------------------
 
After Milan exposition, I'm glad to share & post some articles and press quiotes about the project: 
 
 
BLOG-ESPRITDESIGN.COM
 
They point out the project with the whole video about it, this one posted at the end: "Du love-hôtel pour pigeon à l’extraction de pigments de salamander pour colorer les fils d’imprimante 3D, les propositions témoignent d’un nonconformism revendiqué par l’école."
 
http://www.blog-espritdesign.com/actus/evenement/milan-2015-the-animal-party-exposition-de-la-head-31477
 
 
YOUTUBE-HEAD Geneve Channel
 
The video:
 
 
https://www.youtube.com/watch?v=VHzA6m8Jq3g#t=42
 
 
DEZEEN.COM
 
In the middle of the article they reference the project with a phot and short description: "A salamander's belly offers an alternative method for creating coloured ink for a 3D printer in a project called Pr[ink]t Plastic, it's Fantastic! by Vanesa Lorenzo Toquero, a first year master's student in Media Design."
 
http://www.dezeen.com/2015/04/16/the-animal-party-head-geneva-school-art-design-milan-2015-installation/
 
 
LETEMPS.CH
 
At the very end they point out: "Vanessa Lorenzo Toquero a imaginé un laboratoire domestique qui transforme en pigments pour imprimantes 3D des bactéries prélevées sur des salamandres."
 
http://www.letemps.ch/Page/Uuid/4243534c-df97-11e4-aa18-ff4de01147fa/A_Milan_appareils_à_selfies_et_bêtes_de_design
 
 
IDEAT-China
 
Also in chinese with description and photo:
 
http://www.ideatchina.com/article/phone/?aid=66
 
 
SSMMYYVRSS
 
And my blog and the WHOLE experiment with failures and success since the begging:
 
 
http://ssmmyyvrss.tumblr.com/post/114689633939/pr-ink-plastic-its-fantastic
 
Prink
 
 
Now that I will be free to experiment I have some ideas to continue in parallel, in a more poetique and experimental way.
 
 
 
'''
 
EARLY 2016:'''
 
Received PINK, YELLOW, ORANGE, VIOLET, BIOLUMINISCENT, FLUORESCENT bacteria from SCIENTO [[http://www.sciento.co.uk/]]
 
 
[[File:BioInk4Colors.JPG]]
 
<br>
 
 
= Grow  =
 
<br>
 
<br>
 
 
= Mix =
 
<br>
 
<br>
 
 
= Haunt =
 
<br>
 
<br>
 
 
 
= Printer =
 
<br>
 
1- Make the structure, metal shelves (Photo soon...)
 
2- Try possible feedings: Connect 1 motor stepper - peristaltic pump and wiring (Photowiring)
 
3- Shopping for the enhanced Heating plate or low tech bioreactor
 
4- Connect to the printer--> G-Code + Ultimaker
 
    ---We tried to open arduino: not the same speed / baud rate for the serial port
 
    ------SOLUTION: Sam (Octanis) Show me how their upcycled 2D scanner works & fixed following this [http://forums.the-meiers.org/viewtopic.php?f=4&t=479] So, now I work with CoolTerm (download) at 250000 baud
 
5- Hack the ULTIMAKER (photo soon)
 
    ---Vacuum the dirt (most of it)
 
    ---Spray some 70%ethanol all over (carefully, not directly on the motors or semsible parts, use a kleenex)
 
    ---put off the nozzle and substitute it with the dosificator (scotch it)
 
    ---
 
 
  
 
<br>
 
<br>

Revision as of 11:17, 8 December 2016

Yellow pigment extraction.
Yellow pigment extraction.
Yellow pigment extraction.
Yellow pigment extraction.
Yellow pigment extraction.

What


What if we could produce colors and plastic from bacteria in our kitchens? What if we could create materials, colors and machines for building our objects? DIY is the idea of doing by yourself those activities reserved to the industrial production system that encourages alienation and non-participation. Imagine people producing machines ink and biomaterials out of microorganisms found in Nature and brought to their kitchens. Project developed at Hackuarium with the collaboration of Prof. Xavier Perret. Conceptualized during my first semester at HEAD Geneva, the result was exhibited at Fiera del Mobile di Milano in 2015.


Who


Vanessa Lorenzo Hackuarium team that helped to push this project forward: Sachiko Kana, Luc Henry, Yann Pierson, Gianpaolo Rando, Yann Heurtaux, Carmelo Bisognano (Univercité) and Clément Drévo. Xavier Perret UNIGE that provided proof of concept experiment with the Violacein at his lab. Naiyi Wang that designed infographics Alexandra Midal and Mathieu Bassée HEAD Genève that promoted the early project in 2015.

How


Pr(ink)t plastic, it's fantastic!

Le challenge : construire un objet vivant, plein de bactéries que nous devons nourrir et soigner pour obtenir des couleurs riches pour les utiliser dans une imprimante 3D.

Symbiose et ailleurs. Serait-il très intéressant si est possible d'interagir dans ce système biomécanique avec tes propes bactéries. Expanded self sounds good to me ;)

Certaines bactéries naturelles et non pathogènes, comme le Janthinobacterium Lividum, font des pigments violet foncé. Un mélange de produits chimiques fournira différentes couleurs (c'est aussi possible de faire papier avec levure et acide acétique).

Il faudrait :

1.- Acheter les bactéries

2.- Modifier une imprimante 2D

3.- Système de transmission de bio-encre et un objet esthétique qui permettra de l'utiliser.

A la fin cela ressemblera a un petit laboratoire de bactéries sympathiques.


07/11/2014


Learn with Clément Drévo how to make a Control Petri-dish for tracking the growth of a contaminated one with my own finger bacteria.


12/11/2014


Learn with Gavrilo Bozovic the use of the UV and make tests with different exposure times 10' 30' 45' 60'

Check the results of the use of the UV in different petri dishes for different exposure times: not working properly, will use the autoclave when repaired.


26/11/2014


Select with Yann Pierson a bacteria which is actuallly producing Yellow color. And preparing together with Sachiko the LB medium and learn how to sterealize it in the"pressure cooker".

27/11/2014


All these strains produce pigments:

Micrococcus luteus (ML DSMZ) from DSMZ color: yellow Rhodococcus coprophilus (RC) from DSMZ color: pink Janthinobacterium lividum (JL) from DSMZ color: blue (interesting link http://schaechter.asmblog.org/schaechter/2009/04/by-jenna-tabor-godwin-rhona-stuart-rosa-i-león-zayas-and-chitra-rajakuberan--------janthinobacterium-cultured-on-nb-aga.html) Xanthomonas campestris (XC) from DSMZ color: yellow Rhizobium etli (RE) from DSMZ color: brown Vogesella indoferra (VI) from Dr. Simon Park color: dark blue Arthrobacter agilis (Aag) from Dr. Simon Park color: pink Chromobacterium violaceum (CV) from Dr. Simon Park color: purple Dermacoccus nishinomyaensis (DN) from Dr. Simon Park color: orange Micrococcus roseus (MR) from Dr. Simon Park color: salmon Arthobacter polychromogens (AG) from Dr. Simon Park color: dark blue Micrococcus luteus (ML) from Dr. Simon Park color: yellow

The purple pigment is produced by two of them: - Chromobacterium violaceum - Janthinobacterium lividum

Both produce Violacein. Do mind that C. violaceum is a level 2 organism, opportunistic pathogen. So. I guess the best option is the Janthinobacterium lividum.

Final strains, biosafety level 1: J. Lividum M. Luteus M. Roseus M. Aurantica

03/12/2014

--------------------------------------

Inspiring projects: http://www.ingridnijhoff.nl LaPaillase Grow your Ink The Waag Society


05/12/2014


LB medium (liquid, no agar) See LB protocol

Autoclave instructions: 0.-Plug 1.-fill the bottom with water till reach the 1st level/grid on the bottom. 2.-put your bottles on the top of the grid cubes (covered by another "plane" grid) 3.-close it but not to tight, close the little screw where it written "fermé". 4.-make sure you put 125°C and 1,5T. 5.-it takes 35 min to sterealize (20min to reach the heating t° and 15min to heat it up till sterealized) 6.-wait till is completely cooled down 7.-open (not open till it has reached the room t°) 8.-Unplug Finally extract the culture and empty a little quantity on the new erlenmeyer

                                                                                                                                  • /

EXTRACTIONS: First take some culture from the original bottle, "source". Prepare the table: Clean it with alcohol Fire up the gas in order to have a clean atmosphere without air bacteria Remove the aluminium foil/protection from the mouth of the source bottle & heat it up a bit with fire the mouth of the bottle before emptying the "source" empty the source bottle on the new bottle heat it up a bit with fire the mouth of the bottle and the aluminium foil before putting in again the aluminium foil.


Then we continue the process with this tools:

1.- Pipette, always use the plastic cone(aeroject) on them: We extract some an put them in tubes (then close them).

2.- Then we shake the tubes in the automatic vortex at 10 x 1000 and 10 minutes

3.- Empty the lb medium that should remain on the top, we mix the rest (the pigment), with alcohol, we put the tubes in the machine of ultrasounds, in order to break the molecules to free the pigment. (ultra strong detergent would be helpful) the tube content should seem creamy and colorful.

4.- and then we put them again into the vortex in order to compact the pigment and keep it as a first sample to work with, THE FIRST YELLOW INK!!!


proud mom ;)


For "mass" production ---> Bioreactor (2016)?


UNIGE 23.01.2014


X.Perret, Senior Lecturer Microbiology Unit Laboratory of Microbial Genetics Sciences III – University of Geneva has accepted to collaborate in the project. We are working in the lab at UM under his supervision and the assistance of his students and Phd students.


26/01/2015


Nice! J.Lividum are growing nicely on a poor medium and scarily growing in poor TY + 1%Glycerol (86%). Although nicer color is showing with poor TY.

As in TY is growing fast enough and very nicely, we decided to continue the liquid medium with this configuration.

We put them 24h. on the shaker at 170rpm and 27°C.


27/01/2015


Après 24 heures a 27°C et 170 rpm on peut dire que on voit pas le violacein dans la bouteille. Donc on va essayer de ajouter Glycerol 1% et voir comment ils se comportent.


05/02/15


First Extraction following the article Pantanella-F_2007: [1] Abstract

Aims: To analyse the environmental stimuli modulating violacein and biofilm

production in Janthinobacterium lividum.

Methods and Results: Violacein and biofilm production by J. lividum

DSM1522T was assayed in different growth conditions. Our data suggest that

violacein and biofilm production is controlled by the carbon source, being

inhibited by glucose and enhanced by glycerol. J. lividum produced violacein

also in the presence of different sub-inhibitory concentrations of ampicillin. As

opposite, the production of N-acylhomoserine lactone(s), quorum sensing

regulators was shown to be positively regulated by glucose. Moreover, violaceinproducing

cultures of J. lividum showed higher CFU counts than violaceinnonproducing

ones.


Extraction: Violacein extraction J. lividum was grown in 2 ml of LB or LB-U or LB-Y in 24-well plates. At regular time intervals, bacterial cells from a single well were harvested by centrifugation (16 000 g for 20 min), and treated for violacein extraction. Violacein extraction was carried out according to previously described methods (Blosser and Gray 2000; Matz et al. 2004). Briefly, bacterial cells were lysed with 10% sodium dodecyl sulfate. After 5 min at room temperature, water-saturated butanol was added (1 : 2 v/v) and vortexed. After centrifugation (16 000 g for 10 min) the upper phase, containing violacein, was collected. The extracted violacein was quantified using a spectrophotometer (OD585). The extinction coefficient of violacein (0Æ05601 ml lg)1 cm)1) was used for quantitative calculations (Mendes et al. 2001).

Note: We made the culture on TY and TY + Glycerol


SOME CONCLUSIONS: TY and TY + Gly is perfect for J.Lividum (Violet) MSA, TY not working for M.luteus (Yellow) LB + 4gr. plus of "food" (yeast and peptone) neither. MLuteus grow better on LB agar and liquid medium at 37°C (maybe not well calibrated machine...)

10/02/15


Building the FilaBot DIY Kit, an extruder for plastics. 40 hours of intense work. Thank Michael for the moral support and electronic supervision.


12/02/15


First attempts with Filabot extruder! ----> I've put the natural white pellets on the machine and verted the bio+ink. I have some problems with the porosity of the plastics, gonna try mabe ask an expert to know how to solve this.

The problem seems to be solved almost, if the pigments are added BEFORE putting them into the extruder let them dry (because of the extraction they already have alcohol so they dry fast) for a around 30min at room T°.

The result:

We could start printing with our Pr(ink)t as soon as I get to assembly and connect it!


Related Links


Resources